headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 5742 | contact us 1-800-689-9928
18
TROUBLESHOOTING
Problem Possible Causes Solution
The impact driver does
not work.
The battery is depleted. Charge the battery.
The bit cannot be installed.
The sleeve is not released. Release the sleeve.
The bit does not fit the
sleeve.
Use a suitable bit.
The motor overheats.
Be sure the cooling vents
are free of dust and
obstacles.
Clean and clear vents. Do not cover with
hand during operation.
If the problem remains unsolved after performing the checks described above, call the toll-free helpline
at 1-800-689-9928.
TROUBLESHOOTING
WARNING!
• Turn the variable-speed trigger switch to the “OFF” (centre) position and remove the battery from the
power tool before performing troubleshooting procedures.
To Next Page
Loading...
