headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
21
TROUBLESHOOTING
Problem Possible Causes Solution
The cordless drill/driver
does not work.
The battery is depleted. Charge the battery.
The bit cannot be installed.
The chuck is not opened. Open the chuck.
The bit does not fit the chuck. Use a suitable bit.
The motor is overheating.
Be sure cooling vents are free
from dust and obstacles.
Clean and clear the vents. Do not cover
with your hand during operation.
If the problem remains unsolved after performing the checks described above, call the toll free helpline
at 1-800-689-9928.
TROUBLESHOOTING
To Next Page
Loading...
Need help?
General
