MasterCraft 054-8258-2 - Exploded View; Troubleshooting

headline bars
continuation tabs
notes
warnings
model no. 054-8258-2 | contact us 1.800.689.9928
19
18
TROUBLESHOOTING
Problem Possible Causes Solution
The motor does not start The tool is not connected to a
power source
Connect the tool to a power
source
Blade cannot be removed Saw dust in the slot Clean the clamp slot with a brush
Cutting is difficult Saw blade is worn Replace the saw blade
If the problem remains unsolved after performing the checks described above, call the toll-free helpline at
1-800-689-9928.
EXPLODED VIEW
TROUBLESHOOTING
PART LIST