MasterCraft 054-8357-6 User Manual

9
7 1/4" CIRCULAR SAW - 054-8357-67 1/4" CIRCULAR SAW - 054-8357-6
10
SAFETY GUIDELINES
• Allvisitorsandbystandersmustwearthesamesafetyequipmentthattheoperatormustwear.
• Onlyusesawbladesrecommendedforthissaw.Do not use any abrasive wheels.
• Inspectthetoolcordperiodically,andifdamaged,haveitrepairedbyaqualiedservice
technician. Be aware of the cord location during use.
• Alwayscheckthetoolfordamagedparts. Before further use of the tool, a guard or other part that
is damaged should be carefully checked to determine whether it will operate properly and perform
its intended function. Check for misalignment or binding of moving parts, broken parts, and any other
condition that may affect the tool’s operation. A guard or other part that is damaged should be properly
repaired or replaced by a qualied service technician.
• Savetheseinstructions.Refer to them frequently, and use them to instruct others who may use this
tool. If someone borrows this tool, make sure that person also has these instructions.
• Usetheappropriateextensioncordifoperatingapowertooloutdoors.Use of a cord suitable
for outdoor use reduces the risk of electric shock. When using an extension cord, be sure to use one
sturdy enough for the amperage drawn by your tool. An under-sized cord will produce a drop in line
voltage, resulting in reduced power and overheating. The following table illustrates the correct cord size,
depending on cord length and the tool’s ampere rating. If in doubt, use the next heavier gauge.
The smaller the gage number, the heavier the cord.
TOOL’S AMPERE RATING
(120 V CIRCUIT ONLY)
TOTAL LENGTH OF THE EXTENSION CORD
CORD SIZE IN A. W. G. (MINIMUM)
25’ (7.6 m) 50’ (15.2 m) 100’ (30.4 m) 150’ (45.7 m)
0–6 18 16 16 14
6–8 18 16 14 12
10–12 16 16 14 12
12–16 14 12 Not Recommended
• Alwayswearadustmask.
No. Description No. Description
1 Lower blade guard lever 5 Trigger switch
2 Auxiliary handle 6 Lock-off button
3 Bevel-adjustment knob 7 Spindle-lock button
4 Lower blade guard 8 Bevel gauge
WARNING!
The safe use of this product requires an understanding of the information on the tool and in
this Instruction Manual, as well as knowledge of the project you are attempting. Before use of
this product, familiarize yourself with all of the operating features and safety rules.
DESCRIPTION
Knowyourcircularsaw
1
2
3
5
6
7
8
4

MasterCraft 054-8357-6 Specifications

General

Brand	MasterCraft
Model	054-8357-6
Category	Saw
Language	English