Need help?Do you have a question about the MasterCraft 055-9035-4 and is the answer not in the manual?
General| Model | 055-9035-4 |
|---|---|
| Category | Saw |
| Type | Circular Saw |
| Blade Diameter | 7-1/4 inches |
| Motor | Electric |
| No Load Speed | 5500 RPM |
| Bevel Capacity | 56 degrees |
| Depth of Cut at 45 degrees | 1-3/4 inches |
| Amperage | 15 Amps |
| Depth of Cut at 90 degrees | 2-7/16-in (6.2 cm) |
General safety advice for all power tools.
Guidelines for maintaining a safe work environment.
Precautions related to electrical hazards and power sources.
Advice for the operator's personal well-being.
Proper usage and maintenance of power tools.
Guidelines for using and maintaining battery-powered tools.
Specific safety advice for mitre saw operation.
Safety precautions for battery packs and chargers.
Instructions for securing the tool to a workbench.
Procedure for changing the saw blade.
Details on reading and adjusting the mitre angle scale.
Steps to ensure the fence is perpendicular to the blade.
How to adjust the bevel angle stops.
Details of the product's warranty coverage.
To Next Page