MasterCraft 058-8434-4 User Manual

IMPORTANT INFORMATION
13
AIR-POWERED CLIPPED-HEAD FRAMING NAILER 058-8434-4
Read this Instruction Manual carefully before using the nailer.
• Read and follow all the safety instructions at the beginning of this manual. Inspect the
Air-powered Clipped-head Framing Nailer prior to each use in order to:
– ensure that the proper power source is being used.
– verify that the tool is in proper working order.
N
o. Description No. Description
1
Mastercraft
®
Air-powered Clipped-head
Framing Nailer
6 Regulator (0 to 8.5 bar)
2 Quick connector 7 Filter
3 Quick coupler 8 Cut-off valve
4 Air hose 9 Air compressor
5 Lubricator
WARNING!
Potential hazard that could result in serious injury or loss of life.
• Do not use the tool if it is not in proper working order.
• Do not attempt to clear a jammed nail when the air hose is connected.
• Do not drive a nail on top of an existing nail. Failure to comply could lead to
serious injury or loss of life.
2
5
7
1
3
3
6
8
9
4
MC-588122-03
!

MasterCraft 058-8434-4 Specifications

General

Brand	MasterCraft
Model	058-8434-4
Category	Nail Gun
Language	English