SAFETY GUIDELINES
6
AIR-POWERED SIPHON-FEED SPRAY GUN 058-9336-2
WARNING!
Potential hazard that could result in serious injury or loss of life.
• Do not allow unskilled or untrained individuals to operate the Air-powered
Siphon-feed Spray Gun.
• U
se components recommended by manufacturers: Never modify the tool for
other applications. Use only parts, nozzles, and accessories with
specifications as mentioned in this manual
(see section “Technical
specifications”)
.
• Some solvents and chemicals used in the spray gun may pose a risk of
personal injury or death, or may pose a threat to the environment. The
operator should read the associated Material Safety Data Sheet (MSDS),
understand all warnings, wear suitable personal protective equipment, and
follow safe handling and application procedures, before using the spray gun.
• I
nspect the tool components and attachments before operation and ensure
that they are assembled properly and are not damaged. Failure to comply
will lead to serious injury or loss of life.
• L
ocate the compressor in a well-ventilated area for cooling, a minimum of
12" (31 cm) away from the nearest wall.
• P
rotect the air hose and the power cord from damage and puncture. Inspect
t
hem for weak or worn spots every week, and replace them if necessary.
• A
lways wear hearing protection when using the air compressor. Failure to do
so may result in hearing loss.
• D
o not carry the compressor while it is running.
• D
o not operate the compressor if it is not in a stable position.
• D
o not operate the compressor on a rooftop or in elevated position that
could allow the unit to fall or be tipped over.
To Next Page
Loading...
Need help?
General
