6
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
MOTOR AND ELECTRICAL
SKU number 062-3535-2
rellepmI
Solids handling 1/4” (6.3 mm) spherical
Upper bearing Ball bearing
Lower bearing Ball bearing
Motor protection Auto-reset thermal overload protection in motor
Maximum flow 3600 U.S. GPH (13,627 L/hr)
Maximum head height 28' (8.5 m)
Construction material Aluminum alloy for motor house; plastic for volute and
impeller
Plastic
Liquid temperature range 32 to 95°F (0 to 35°C)
Single phase Permanent split capacitor (PSC)
Motor NEMA L, torque curve, oil-filled, squirrel cage induction,
class B insulation
Seal Lip seal
Discharge size 1 1/2" (3.8 cm) female national pipe thread (FNPT)
or 1 1/4" (3.2 cm) FNPT (with adaptor)
Cord length 10' (3 m)
Cord size 18 AWG
3/1PH
115 V ACPower
06zH
0543MPR
Full load amps 7.6
Cord type SJTW
NOTE:
Do not reduce size of discharge pipe or hose below 1 1/4" (3.2 cm) diameter.
If discharge is too small, pump will overheat and fail prematurely.
This pump is designed for use in a residential sump only. Only pump
water with this pump.
model no. 062-3535-2 | contact us 1-800-689-9928
To Next Page
Loading...
Need help?
General
