headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 062-3579-8 | contact us 1-800-689-9928
6
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
Liquid temperature range 32 to 77°F (0 to 25°C)
Impeller Plastic
Solids handling 1/4” (6.3 mm) spherical
Discharge size 1 1/2” (3.8 cm) female national pipe thread (FNPT) or
1 1/4” (3.2 cm) FNPT (with adaptor)
Seal Lip seal
Cord length 10’ (3 m)
Upper bearing Ball bearing
Lower bearing Ball bearing
Single phase Permanent split capacitor (PSC)
Motor protection Auto-reset thermal overload protection in motor
Construction material Aluminum alloy for motor house; plastic for volute and
impeller
Motor NEMA L, torque curve, oil-filled, squirrel cage induction,
class B insulation
Maximum flow 3450 U.S. GPH (13,060 L/hr)
Maximum head height 26’ (7.9 m)
MOTOR AND ELECTRICAL
SKU number 062-3579-8
HP 1/4
Volt 115
Hz 60
RPM 3450
Full load amps 6.4
Cord size 18 AWG
Cord type SJTW
NOTE:
Do not reduce size of discharge pipe or hose below 1 1/4” (3.2 cm) diameter.
If discharge is too small, pump will overheat and fail prematurely.
This pump is designed for use in a residential sump only. Only pump
water with this pump.
To Next Page
Loading...
