MasterCraft 2014 X14v - Profile Screen; Profiles

Profiles
The Proles screen is accessible
by pressing the Quick Access Key.
This feature displays rider/user
proles for cruise controls, based
on user preferences for speed, ballast and
attitude adjustment (tabs) settings.
To scroll through the available proles,
touch [SURF LEFT] and slide nger to the
left or right. Touch [ACTIVATE] when the
desired prole is shown.
Up to 16 rider/user proles can be cre-
ated and stored.
Prole Screen—
Soft Key Commands
PROFILES—provides utilities for adding
new users, or editing/deleting existing users.
Touch screen commands for Proles in-
clude:
CRUISE—touch to turn the cruise ON
or OFF.
DELETE—deletes the selected rider af-
ter a conrmation warning.
ACTIVATE—makes the user displayed
in [SURF LEFT] active with all settings
activated.
EDIT—selects and edits existing user
name information.
ADD NEW—provides an interface to
add new user information. See following
for details.
New User Prole
This is how a New User Prole is estab-
lished:
Function and Description
To create a new prole, press the [PRO-
FILE] Quick Access Key.
Then touch [ADD NEW] to begin the
process.
Type a name for the new prole, using
the touch keypad, followed by touching
[DONE].
Touch [EDIT] to retype the name (if
changes are required to the prole name
just created), or touch [NEXT] to continue
with this new prole, or [CANCEL] to re-
turn to the main Proles screen.
If [NEXT] was touched, set the speed
Page 3-20 2014 MasterCraft Owners Manual • Gauges & Video Screens
G A U G E S & V I D E O S C R E E N S