MasterCraft 2014 X14v - Current Position; GPS (Optional); GPS Display; Zoom;Pan Menu Options

rider prole.
NOTE: If no rider prole is selected,
nothing will occur or change.
Touch to save these settings to a new
rider prole. A keyboard is displayed to
name the new prole and the new prole
process is launched. (See Proles in this
section of the Owner’s Manual for more
information.)
GPS (Optional)
The GPS display screen is ac-
cessible by pressing Quick Access
Key. The GPS feature displays
map data, latitude and longitude
coordinates, time and speed. Addi-
tional touch point commands are accessed
by touching the screen.
GPS Display—
Touch Point Commands
TRACKING MENU OPTIONS—Track-
ing shows the current route and any way-
points you have set. A green arrow indicates
your current position, and the red square
indicates the initiation point of tracking.
CURRENT POSITION—This is used to
return to the current boat/satellite position
after having moved the cursor to another
location.
CREATE WAYPOINT—This displays a
marker or “waypoint” on the map to mark
a favorite location after displaying a conr-
mation message.
CLEAR TRACK—Displays a conrma-
tion message before deleting the current
track information.
SAVE TRACK—Displays a conrmation
message before saving the current track in-
formation.
Zoom/Pan Menu Options
ZOOM IN—Zooms in closer to the area
indicated by the + as shown:
UP-LEFT-RIGHT-DOWN ARROWS—
These facilitate navigation of the GPS by
moving the + over the map in the direction
of the arrow.
Gauges & Video Screens • 2014 MasterCraft Owners Manual Page 3-25
G A U G E S & V I D E O S C R E E N S