Set the tabs by either touching and slid-
ing down the ridged area or by touching the
UP or DOWN arrows next to the ridged
area.
Touch [NEXT] to continue.
Set the ballast tanks by touching and
sliding on the tank area or by touching the
UP or DOWN arrows alongside the tank
areas.
Touch [NEXT] to continue.
Review the Prole settings. Touch [SAVE]
to save the prole and return to the main
Proles screen with the new prole dis-
played. Touch [ACTIVATE] to activate
the settings for this prole.
Gauges & Video Screens • 2014 MasterCraft Owners Manual Page 3-23
G A U G E S & V I D E O S C R E E N S
To Next Page
Loading...