(ON or OFF)
• Surf tabs (ON or OFF)
• Depth transducer (ON or OFF)
NOTE: To gain access to this screen re-
quires a Dealer Code.
NOTE: If Factory Reset is touched, the
following pop-up is displayed:
GPS Settings Menu
The GPS Utilities include the following:
• Waypoint manager
• Track manager
• Chart and time set-up
• Depth and position settings
• GPS status
Waypoint Manager
Waypoints allow you to mark specic
locations by latitude and longitude. After
the waypoints are established, the Way-
point Manager allows you to associate an
icon with them for identication. You can
delete a single waypoint by using the [DE-
LETE] key, or all of them at once with
[DELETE ALL]. Pressing the [GO TO
WPT] key displays the GPS screen con-
taining the currently highlighted waypoint.
Waypoints—Displays a list of existing
waypoints that have been set. Use the UP
and DOWN keys to highlight the desired
waypoint.
Waypoint Title—Edits the waypoint title.
Waypoint Icon—Assigns one of four dif-
ferent icons to any of the waypoints listed.
GO TO…–Displays latitude and longi-
tude values for the currently highlighted
waypoint on the list. When touched, it will
jump to the maps application to the loca-
tion of the selected waypoint.
Page 3-30 2014 MasterCraft Owners Manual • Gauges & Video Screens
G A U G E S & V I D E O S C R E E N S
To Next Page
Loading...
