To Next PageTo Next Page
Need help?Do you have a question about the MasterCraft 312222 and is the answer not in the manual?
General| Model | 312222 |
|---|---|
| Category | Water Pump |
| Type | Submersible |
| Power Source | Electric |
| Voltage | 120V |
| Horsepower | 1/3 HP |
| Flow Rate | 3000 GPH |
| Max Head | 25 ft |
| Outlet Size | 1-1/4 in |
Specific warnings and precautions related to electrical hazards and capacitor voltage.
Covers operational safety, temperature considerations, freezing prevention, and work area maintenance.
Steps for removing an old pump and installing a new one, including pipe checks.
Detailed instructions for installing the pump in a well using a driven point setup.
Guide for installing the pump when using a cased well, ensuring proper pipe placement.
Steps for setting up the pump for surface water applications, like sprinkler systems.
Details and steps for connecting a pre-charged pressure tank to the pump's discharge.
Instructions for connecting a standard pressure tank with an Air Volume Control (AVC).
Information on adjusting motor voltage settings and switch configurations.
Guide to changing the motor's voltage setting from 230V to 115V.
Procedures for making safe and compliant electrical connections to the pump.
Table detailing recommended wire gauges and fuse ratings based on distance and load.
Detailed step-by-step guide on how to prime the pump and piping system.
Diagnosing and fixing issues where the motor fails to start or operate.
Causes and remedies for motors running hot and tripping the overload protection.
Troubleshooting steps when the pump runs but delivers no water.
Addressing issues of low water output from the pump.
Solutions for pumps that cycle too frequently or do not shut off.
Fixing air spurts from faucets, indicating air in the system.
Instructions for checking and adjusting the air pressure in the system's pressure tank.
