Operating Instructions
Before You Start – Electrical
In the event of a malfunction or short circuit, grounding provides the path of least resistance for
electrical current and reduces the risk of electric shock for the operator. This tool is equipped with an
electric cord that has an equipment grounding conductor and a grounding plug. The plug MUST be
plugged into a matching outlet that is properly installed and grounded in accordance with ALL local
codes and ordinances.
DO NOT MODIFY THE PLUG PROVIDED. If it will not t the outlet, have the proper outlet installed by
an electrician.
Figure 2
IMPROPER CONNECTION of the equipment grounding conductor can result in increased risk of
electric shock. The conductor with the green insulation (with or without yellow stripes) is the equipment
grounding conductor. If repair or replacement of the electric cord or plug is necessary, DO NOT
connect the equipment grounding conductor to a live terminal.
CHECK with a qualied electrician or service personnel if you do not completely understand the
grounding instructions, or if you are not sure if the tool is properly grounded.
This tool is intended for use on a circuit that has an outlet that looks like the one illustrated. The
original tool has a grounding plug that looks like the plug illustrated (Figure 2).
5
To Next Page
Loading...
Need help?
General
