MasterCraft Maximum User Manual

OPERATING INSTRUCTIONS
14
5 U.S. GALLONS (18.9 L) AIR COMPRESSOR 058-9308-0
Break-in procedure
1. Make sure the ON/OFF switch (1) is in
the OFF position
(fig B).
2. Open the drain valves (1) by turning
them counter-clockwise to permit air to
escape and prevent air pressure
build-up in the air tank during the
break-in period
(fig C) .
WARNING!
Potential hazard that could result in serious injury or loss of life.
• Do not touch the compressor while operating, as the motor will be very hot.
Allow the compressor to cool before handling or servicing it to avoid skin
burns or other injuries.
• Do not move or attempt to service the compressor when the air tank is
under pressure.
• Never use air hose or power cord to pull or move the compressor. If
required, use the handle to move it.
• Never direct air stream toward yourself or other people standing nearby.
0
50
25
0
75
125
18
15
10
5
100
150
175
200
225
250
0
25
0
5
10
15
20
50
75
100
125
150
175
200
225
250
fig B
MC-589308-04
1
fig C
MC-589308-05
0
0
50
25
0
75
125
18
15
10
5
100
150
175
200
225
250
0
25
0
5
10
15
20
50
75
100
125
150
175
200
225
250
1

MasterCraft Maximum Specifications

General

Power Source	Electric
Maximum Pressure	175 PSI
Max PSI	175 PSI
Voltage	120 V
Pump Type	Oil-Free
Amperage	15 Amps
Noise Level	78 dBA