EasyManuals Logo

MasterCraft Maximum User Manual

MasterCraft Maximum
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
MAINTENANCE
18
5 U.S. GALLONS (18.9 L) AIR COMPRESSOR 058-9308-0
General maintenance
Regular and periodic maintenance of the compressor ensures trouble-free operation.
Draining the air tank
Note: Drain the air tanks after each use, especially during cold weather to reduce freezing of water
condensation and to prevent corrosion of the tank.
1. Turn OFF the power supply to the pump. Release air pressure in air tanks by pulling the safety
valve ring.
2. Turn the drain valves counter-clockwise and tilt the air tanks to drain water and moisture
completely.
3. Tighten the drain valves.
WARNING!
Potential hazard that could result in serious injury or loss of life.
Always shut OFF the compressor, remove the power plug from the
electrical outlet, and release all pressure from the air system, before
attempting to install, service, relocate, or perform any maintenance in the
compressor.
Do not use a damaged tool. If abnormal noise or vibration occurs, rectify
the problem before use.
Have the compressor repaired by an authorized service person.
DESCRIPTION COMPONENTS
MAXIMUM SERVICE INTERVAL
Daily Weekly Monthly
To drain moisture Air tanks X
To check proper operation Safety relief valve X
To clean Air filter X
Test for leaks All connections X

Other manuals for MasterCraft Maximum

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MasterCraft Maximum and is the answer not in the manual?

MasterCraft Maximum Specifications

General IconGeneral
Power SourceElectric
Maximum Pressure175 PSI
Max PSI175 PSI
Voltage120 V
Pump TypeOil-Free
Amperage15 Amps
Noise Level78 dBA

Related product manuals