MasterCraft X23 2017 - User Settings Descriptions; User Settings Soft Key Commands

2017 OWNERS MANUAL / 118
User Settings Sof Key Commands
NEXT PAGE – advances to the next or previous page of settings
CHANGE – changes the currently selected setting
DOWN ARROW – highlights the next setting
BACK – returns to the Main Settings Menu
PLUS – increases the setting value
MINUS – decreases the setting value
USER SETTINGS DESCRIPTIONS
Function Description
Units Options:
• US Standard (US STD).
• Metric
Auto Volume Options:
• Settings 1-5
• Disable
Fuel Management Options:
• Enable
• Disable
Min Depth Alarm Options:
• OFF
• Increments of 1/2ft from 1 to 100ft.
Fire Extinguisher Options:
• Enable (Pop-up)
• Disable (Pop-up)
Factory Reset Restores all factory settings to their original
values.
Option:
• YES
• NO
Function Description
Day Brightness Sets the screen brightness for daylight.
Options:
• 1-5% (increment of 1%)
• 10-100% (increments of 10%)
Night Brightness Sets the screen brightness for nighttime.
Options:
• 1-5% (increment of 1%)
• 10-100% (increments of 10%)
Gauge Brightness
- Day
Sets the gauge brightness for daylight.
Options:
• 10-100% (increments of 10%)
Gauge Brightness
- Night
Sets the gauge brightness for nighttime.
Options:
• 10-100% (increments of 10%)
Tab Settings
Page
Provides the user with the opportunity to
control the tab positions for the center and
surf tabs on the boat. Using the up and down
arrows, change the speed of the Center tab.
When done, press Next Setting (second
button on the right). In the same manner,
change the speed of the surf tabs. When
finished, touch Back (first button on the right
side).
Function Control
Ballast Settings
Page
Control the ballast fill and drain times.
To adjust the fill and drain times use the soft
keys. Press the Next Setting button to move
between the times. Press the up and down
arrow buttons to adjust the minutes and
seconds. Press Back when finished.
Service Information
Service information screens provide the ability for the user to view
the software versions and allows the dealer to reset the oil change
and the dealer service schedule.
NOTE: The Dealer Service Reset requires a dealer code to be
entered before gaining access to the screens.