2017 OWNERS MANUAL / 170
COURSE MANAGER ALL SLALOM
AND JUMPING EVENTS
On the 3 Event screen, touch the [Course Manager] in the bottom of
the screen to start mapping a course.
Touch the arrows to select a course that is not mapped. Touch
[Map Course].
NOTE: Additional Details on Course List: The blue lettering above
the course list displays the mapped information for the course se-
lected. Always highlight a course on the list page before mapping
a new course. When mapping a course, the program assigns the
mapping to whatever name is highlights on the course list. For ex-
ample, if Course1 was previously mapped and is highlighted when a
new course is mapped, the new mapping will overwrite the original.
Touch the arrows to select a course type: Jump, Slalom 4-Buoy or
Slalom 8-Buoy. Touch [Continue].
Allow the program time to load.
SLALOM SETTINGS
TOURNAMENT OR TRAINING
On the 3 Event Screen, touch the Settings
touch command to access the pop-up list.
Touch each option to view or change the
setting. When available, touch the arrows
to change the setting.
Touch [Settings]. On the Pop-up, touch the arrows to change the
Slalom Wait Time.
Touch [Settings]. Touch [Buzzer Volume]. On the Pop-up, touch the
arrows to turn Buzzer Volume UP or DOWN.
Touch [Exit] to return to close the pop-up.
Touch [Exit] to return to close the pop-up. Touch [Settings]. Touch
[Prop Type]. On the Pop-up, touch to change from 3 blade or 4
blade.
Touch [Settings]. Touch [Timing Recap]. The pop-up displays
current and previous event times.
To Next Page
Loading...
