13
bevel scale. The blade can be positioned at any angle, from a 90° straight cut
(0° on the scale) to a 48° left and right bevel (Fig. 1a). Tighten the bevel lock
knob to secure the saw head.
NOTE: It is necessary to adjust the 48° left and right bevel angle specially.
Miter Fence
The miter fence is in two pieces, with numbered ruler on the left and right
side and a slightly taller left and right side for additional support. Hold the
workpiece securely against the miter fence when making all cuts. Use the
hold down clamp to secure the workpiece whenever possible.
Self-Retracting Lower Blade Guard
The lower blade guard is made of shock-resistant, see-through plastic and
it provides protection from each side of the blade. It retracts over the upper
blade guard as the blade is lowered into the workpiece.
Hold Down Clamp
Mounted on left or right fence or base to securely clamp workpiece.
Carrying Handle/Support Bracket
Use to carry and transport saw.
To Next Page
Loading...
