CARTONCONTENTS
UNPACKINGYOURMITER SAW
CAUTION
To avoid injury from unexpected starting or
electrical shock, do not plug the power cord
into a source of power during unpacking and
assembly, This cord must remain unplugged
whenever you are working on the saw,
1. Remove the miter saw from the carton.
iMPORTANT: Do not lift miter saw by
the trigger switch handle. It may cause
misalignment. Lift machine by the built-in
carry handle.
2. Place the saw on a secure stationary work
surface.
3. Separate all parts from the packing material.
Check each one with the illustration to make
certain all items are accounted for, before
discarding any packing material.
CAUTION
If any part is missing or damaged, do not
attempt to assemble the miter saw, or plug in
the power cord until the missing or damaged
part is correctly replaced, To avoid electric
shock, use only identical replacement parts
when servicing double insulated tools,
TABLE OF PARTS
iTEM DESCRiPTiON QUANTITY
A Miter saw 1
B Arm bracket 2
C Flat washer 4
D Lock knob 4
E Hold-down clamp lock knob 2
F Power cord storage clip 2
G Power cord stroage clip 2
mounting hardware
H Blade wrench 1
I Dust bag 1
J Hold-down clamp 1
C
D E
H
I
G
J
To Next Page
Loading...
