To Next PageTo Next Page
Need help?Do you have a question about the Mastervolt IVO SMART 12/30-2 and is the answer not in the manual?
General| Input Voltage | 90 - 265 VAC |
|---|---|
| Input Frequency | 50 / 60 Hz |
| Output Current | 30 A |
| Efficiency | > 90% |
| Weight | 2.5 kg |
| Number of Outputs | 2 |
| Protection Degree | IP21 |
| Output Voltage | 12 V |
| Protection | short circuit, over temperature |
| Battery Type | Gel, AGM, Lithium |
| Operating Temperature | -20°C to +50°C |
| Charging Characteristic | 3-step (Bulk, Absorption, Float) |
Details on the warranty terms and conditions for the Mastervolt unit.
Information regarding the testing and inspection process for Mastervolt units.
Specifies Mastervolt's limitations of liability regarding product use and manual accuracy.
Guidelines for correct usage of the battery charger and essential safety precautions.
Safety measures to be taken during maintenance and repair of the battery charger.
Highlights critical warnings and potential dangers associated with the battery charger operation.
Overview of general model, manufacturer, and function details.
Details on voltage, frequency, current, power factor, and efficiency.
Information on output voltage, charge characteristic, battery types, and voltages.
Operating temperature range, cooling method, and humidity limits.
Physical dimensions, protection degree, weight, and safety standards.
Overview of the IVO Smart battery charger's design and capabilities.
Explanation of using battery isolators with the charger and voltage compensation.
Guidance on charging a separate cranking battery alongside the main battery.
Explanation of using the charger in a constant trickle charge (float) mode.
Information on adjusting float voltage for different battery types like gel/wet.
Detailed explanation of the Bulk, Absorption, and Float charging stages.
Guidance on the recommended mounting positions for the IVO charger.
Instructions for connecting batteries, DC distribution, and auxiliary equipment.
Steps for connecting the charger to the AC mains or generator supply.
Guidance on connecting battery isolators for charging multiple battery sets.
Instructions for connecting temperature sensors and remote control panels.
How to switch the charger on and off, and its immediate operation.
Explanation of the status indicated by the charger's LED lights (Bulk, Absorption, Float).
Description of jumpers on the front panel for specific application settings.
Understanding battery capacity, discharge limits, and capacity reduction factors.
Recommendations for extending battery lifespan, including temperature and discharge practices.
Basic maintenance requirements for reliable operation, including checks and cleaning.
Declaration of conformity with EC directives and harmonized standards for EMC and safety.
Key details including design, manufacturer, model, article number, and color.
Comprehensive technical specifications for the IVO Smart 12/30-2 charger.
Advice on what to do in case of a defect or malfunction with the charger.
Information on CE marking, LLOYDS, DNV, ABS approvals, and ISO 9001 manufacturing.
List of available accessories like remote controls and temperature sensors.
Details on internal components and service-related information.
Explanation of the charger's internal operating principles and architecture.
Register values for charger settings like bulk time, voltages, and currents.
Graph illustrating how charging voltage adjusts with battery temperature.
Graph showing the relationship between input voltage and maximum output current.
Graphs depicting charging voltage and current over time and different stages.
Key details including design, manufacturer, model, article number, and color.
Comprehensive technical specifications for the IVO Smart 12/50-2 charger.
Advice on what to do in case of a defect or malfunction with the charger.
Information on CE marking, LLOYDS, DNV, ABS approvals, and ISO 9001 manufacturing.
List of available accessories like remote controls and temperature sensors.
Details on internal components and service-related information.
Explanation of the charger's internal operating principles and architecture.
Register values for charger settings like bulk time, voltages, and currents.
Graph illustrating how charging voltage adjusts with battery temperature.
Graph showing the relationship between input voltage and maximum output current.
Graphs depicting charging voltage and current over time and different stages.
General specifications for the Mastervision modular switchboard system.
Details on the standard remote control panel for Mastervolt chargers.
Details on the basic remote control panel for Mastervolt chargers.
Visual guide to AC and DC connections, including status indicators.
Explanation of jumper settings for charger configuration like battery type and float modes.
Diagram illustrating the basic remote control panel with LED indicators.
Diagram illustrating the standard remote control panel with LED indicators and output control.
