To Next PageTo Next Page
Need help?Do you have a question about the Mastervolt Windmaster 500 and is the answer not in the manual?
General| Model | Wind Master 500 |
|---|---|
| Output Power | 500 W |
| Efficiency | >90% |
| Continuous Power | 500 W |
| Frequency | 50/60 Hz |
| Type | Inverter |
| Output Voltage | 230 VAC |
| Protection | Over temperature |
| DC Input Voltage | 12V/24V/48V |
Details the contents of the delivery and checks for damage after unpacking.
Covers crucial safety precautions, including voltage limits and handling.
Provides guidelines on selecting an optimal location and environmental conditions.
Details how to connect the inverter to the grid and system, including local regulations.
Details the meaning of the LED indicator states for operation and fault conditions.
Lists common errors detected by the LED indicator and troubleshooting steps.
Describes the automatic operation of the Windmaster 500 and how to switch it off.
Provides steps for safely removing the Windmaster 500 from its mounting.
Outlines the product warranty terms and support procedures.
States Mastervolt's limitations of liability regarding the manual and product use.
Illustrates the DC to AC conversion relationship based on input voltage.
Shows a general diagram for connecting the inverter to a wind turbine and grid.
Specifies requirements for the DC interface, including surge and over-voltage protection.
Explains grounding requirements for the inverter and wind turbine.
Describes how to connect multiple units in parallel to increase output power.
