10
Indicator status
Startup
Shutdown
Low power
During charging
Full charged
OID mode
Bluetooth connected
Bluetooth not connected
Firmware upgrading
Firmware upgraded
Solid blue light
Off
Red light
Red light
Green light
Flashes blue light
Solid blue light
Solid blue light
Solid blue light
Solid blue light
Light effect: all LEDs illuminate orange light in sequence from the center (4th and 5th LEDs) to both sides. All LEDs go out after this light effect
repeats 3 times.
Light effect: all LEDs illuminate orange light in sequence from both sides (1st and 8th LEDs) to the center. All LEDs go out after this light effect
repeats 3 times.
Flash red light twice
Off
Off
-
-
-
Illuminate orange light [with luminance of 80%] in sequence from 1st LED to 8th LED as the firmware upgrades. All 8 LEDs illuminate when the
firmware is 100% upgraded.
Flash orange light twice [at an interval of 0.3 s]. (After that, the robots automatically shuts down and restarts)
Solid orange light
Off
Red breathing lights
Off
Off
Flashes blue light
Solid orange light
Solid orange light
Orange breathing light
Solid orange light
11
Software update
When Matatalab releases an Activity Box update or a system software update, you can download the updates through the APP to upgrade your device. Please note that
this device supports a wireless connection range of 10 meters in an open area. To upgrade the device’s system through the APP, make sure the device is within the range
and in a stable network before pairing with your phone.
12 Technical specification
13 Attention
Status Power indicator Coding indicators Eye indicators
Specification
[5V2A adapter]
Recommended age group
Service time
Body shell
Product dimensions
Input voltage and current
Battery capacity
Sensor
Operating temperature
Storage temperature
Normal charging time
3~5 years old
>=4h
Environmentally-friendly ABS material, in line with ROHS
80*80*58mm
5V2A
1500mAh
OID sensor
0°C-40°C
-10°C-55°C
2.5h
iOS Android
EN
11
To Next Page
Loading...