Match PP 41DSP User Manual

PP 41DSP
P L U G & P L A Y
4-Kanal Verstärker mit integriertem DSP
4-Channel Amplier with integrated DSP
deutsch / english

Match PP 41DSP Specifications

General

Brand	Match
Model	PP 41DSP
Category	Amplifier
Language	English

Summary

General Instructions

General Installation Guidelines

Read manual carefully, disconnect battery, install in dry location, secure unit properly.

Connecting the PP 41DSP Amplifier

Use negative ground system, provided MATCH cable, plan wire routing, use correct fuse.

Connectors and Control Units

Connection Ports

Includes PP 1SUB, Remote Control, and System connectors for various functions.

Control and Indicator Elements

Initial Start-up and Functions

Key Component Functions

Operational Controls and Indicators

Sound Setup Selection

Displaying Selected Sound Setup

Selecting a New Sound Setup

Press and hold setup buttons for over one second to increment/decrement and select desired setup.

Installation Procedures

Connecting to the Car Radio

Steps for disconnecting vehicle harness from radio and connecting MATCH cable harness.

Power Supply Options

Options for powering via vehicle harness or direct battery connection with inline fuse.

Final Amplifier Connection

Connecting the MATCH harness to the PP 41DSP amplifier unit.

MOST Bus System Integration

PP 1SUB Subwoofer Integration

Connecting PP 1SUB Amplifier

PP 1SUB Power Integration

Power Line Connection Advice

Technical Specifications

Output Power and Frequency

DSP and Signal Performance

Input and Voltage Parameters