Need help?Do you have a question about the Match PP 62DSP and is the answer not in the manual?
Key instructions for safe installation, connection, and handling of the PP 62DSP amplifier.
Subwoofer Output, Line Outputs, System Connector, and USB Input for audio and data connections.
Input Sensitivity, Clipping LED, Status LED, and Control Pushbutton for adjustment and monitoring.
Rem In/Out, RC Switch Aux/Byp, and Control Input for remote operation and accessory integration.
Details on Subwoofer Output, Input Sensitivity, Clipping LED, USB, and MicroSD functions.
Operation of the Control Pushbutton, Status LED, and basic start-up procedures.
Functionality of Rem In/Out, RC Switch, and Control Input for remote operation.
Power Save Mode for reduced consumption and Smart high-level input with ADEP circuit.
Enables amplifier configuration via MicroSD card without direct PC connection.
Step-by-step guide to download, transfer, and install car-specific sound setup files.
Instructions for connecting the amplifier to the car radio using the MATCH cable harness.
Details on power supply via vehicle harness or direct connection to the car battery, including fusing.
Adjusting input sensitivity and configuring the automatic turn-on feature.
Steps for connecting to PC, downloading/installing DSP PC-Tool, and initial software operation.
Step-by-step guide to install an optional MATCH Extension Card (MEC) into the amplifier.
To Next Page
General
