Matelec FPC-36040 - Page 16

16
MANUFACTURED BY MATelec AUSTRALIA EMAIL: info@matelecaustralia.com.au
MATelec reserves the right to alter technical specications without notice
DISTRIBUTED BY: INSTALLATION DATE:
SERIAL NUMBER:
MANUFACTURED BY MATelec AUSTRALIA EMAIL: info@matelecaustralia.com.au
MATelec reserves the right to alter technical specications without notice
PUMP 1 PUMP 2
AUTOAUTO
Running Idle
System OK. No Alarms
DUAL PUMP CONTROL
The HMI
AT A GLANCE
OK
MUTE
A quick reference to the controller’s HMI and Indicator functions and meanings.
- Scroll through main pages
- Changes digit when adjusting values
- Change pump selection 1 or 2 on main page
- Scroll through page list
- Changes number when adjusting values
- Change pump mode on main page
- Select and saves value 'to be changed'
- Access pump mode adjustment on main page
- Reset system faults on alarm page
- Mutes active audible alarm.