Matelec FPC-36040 - Page 2

2
Your Advance Dual Pump Controller reects the superior quality and attention to detail in design, engineering and
manufacturing that has distinguished MATelec. Products for decades. The controller incorporates the very latest in
micro-processor technology, ensuring you, the owner/operator, of many years of functional, reliable and ‘user friendly’
operation.
Please read this manual prior to installation and operation of the controller.
WELCOME TO ADVANCE DUAL PUMP CONTROL
CONTENTS
SAFETY
• Prior to Installation, ensure power supply is isolated.
• Power supply must be Circuit Breaker Protected. (Qualied Electrician to determine appropriate amp rating.)
• Electrical connection to the panel must be carried out in accordance with ‘Connection Instructions’, see page 3.
• Addition or modications to the control panel are not permitted and will void warranty.
• The controller is not intended for use by children or inrm persons without supervision.
• Repairs to the Controller must only be carried out by a suitably qualied Electrician
WARNING: All electrical connections must be carried out by a suitably qualied and
registered electrician
SAFETY 2
INSTALLATION 3
Mounting
Connection
OPERATION 4-6
HMI OPERATION 7-1
MODBUS
COMMUNICATIONS 11-13
CIRCUIT DIAGRAM 14-15
AT A GLANCE 16