Matrix Automowtic MOW 800 - Settings Configuration and Operation; Display Screen and Basic Operation; Functional Settings Menu

31
SETTINGS CONFIGURATION AND
ADJUSTMENT
1. OPERATION OF DISPLAY SCREEN
• Press the power button
, the screen shows "EN-
TER PIN CODE", input initial password (0000), then
press "OK" to enter the operation interface.
ENTER PIN CODE
OK
• Press START to turn on the mower: put the mow-
er on the fence and the mower head face to the
charge station.
• Put the mower in front of the charging station,
GLVWDQFHZLWKLQFPSUHVVȊVWDUWȋZKHQWKHH[-
truding poles of the mower touch the paddles of
the charging station , the indicator light on the
FKDUJLQJVWDWLRQWXUQVWRUHGWKHQPRZHUJRR΍
the fence and start to mow inside the lawn.
• Press MENU to set function.
• Press HOME to direct the mower back to the
charge station (this is to stop the mower during
mowing): Press “HOME”,the mower will stop mow-
ing, find the closest fence line, then go back to the
charging station along the line. In this condition,
after fully charged, mower won’t start by it self,
have to re-start by manual.
2. FUNCTIONAL SETTINGS
• Select
to set the indicating languages, press OK, then
select one of the following choices, press OK again.
Suomi
• Select , press OK to enter into the “SCHEDULE”
interface. Before set the schedule, please put the
mower on the fence line, face to the charging station.
Work Mode
Work Hours
Work Days
Reset Timer
TIPS
• Select “Work mode” to set the mode of working:
Full Area or Area 1,2,3. Area 1,2,3: in this mode,
the SCHEDULE function must work together with
Sub-area function.
UK