8
ENGLISH
CONSOLE DESCRIPTION
The Matrix machine is inspected before it is packaged. Carefully unpack the unit
and dispose of the box material. Note: There is a thin protective sheet of clear
plastic on the overlay of the console that should be removed before use.
The console has a fully integrated touch screen display. All information required for workouts is explained
on-screen. Exploration of the interface is highly encouraged. The information explaining how to program
for various workouts will give an explanation about the contents of each screen on the console.
A) GO: One Touch Start.
B) PAUSE: Displayed on-screen during workout. Pauses workout. Pause duration can be set in manager
or engineering mode. Press stop to end workout and show workout summary data.
C) USB 2.0 PORT: Device charging (output rating 5V /2A), device media, and software updates.
D) HEADPHONE JACK: Outputs audio from console to connected 3.5mm headphones.
E) ENERGY SAVER LIGHT: Indicates if machine is in energy saver mode.
F) MOTION SENSOR: Wave your hand over the sensor to wake the console.
G) RFID SENSOR: Wireless login access location.
* Supported standards with carrier frequency of 13.56 MHz include; ISO 14443 A, ISO 15693, ISO
14443 B, Sony Felica, Inside Contact-less (HID iClass), and LEGIC RF.
C F DEAG
CONSOLE OPERATION
To Next Page
Loading...
