41
recommend persons with medical implants
to consult their physician and the medical
implant manufacturer before operating this
machine.
Proper use
For pole hedge trimmer
The device is only determined for cutting and
trimming of hedges, bushes and shrubs around
your house.
For pole chain saw
The product tted with a cutting attachment
mounted on a pole to enable the operator to cut
the branches of standing trees but not intends
for cutting woods as normal pole chain saw.
Any other usage, which do not declared in this
manual, can damage the device and cause a
serious danger to the users.
The use of the machine in case of rain or humid
environment is prohibited.
The machine is designed for use by adults. The
operator or user is responsible for accidents
or damage to other people or their properties.
The manufacturer is not liable for any damages
because of the usage against its original
functions or incorrect operation.
Please note that our devices have not been
constructed for commercial, technical or
industrial use. We do not accept any warranty if
the device is used in commercial, handicraft or
industrial businesses or for similar operations.
Proper handling of the machine will reduce
possible personal injury from the cutter blades.
- Keep cable away from cutting area. During
operation the cable may be hidden in shrubs and
can be accidentally cut by the blade.
Warning:
- Do not use the machine when the operator
is tired, ill or under the inuence of alcohol or
other drugs.
- When operating this 2 in 1 machine, always
maintain a rm grip on both handles. Wrap
your ngers tightly around each handle,
cradling the handle between thumb and
forenger. To keep the tool under control at
all times, avoid changing your grip during
operation. Make sure that the control handles
are in good condition and free of moisture,
mud, oil or grease.
- Start the pole hedge trimmer only after the
machine has been completely assembled and
all accessory parts have been attached.
Warning: Failure to maintain complete control of
the machine at all could result in serious bodily
injury or DEATH.
Residual risks
Even when the tool is used as prescribed it
is not possible to eliminate all residual risk
factors. The following hazards may arise in
connection with the tool’s construction and
design:
1. cuts
2. Damage to lungs if an eective dust mask is
not worn.
3. Damage to hearing if eective hearing
protection is not worn.
4. Health defects resulting from vibration
emission if the appliance is being used over
longer period of time or not adequately managed
and properly maintained.
WARNING! This machine produces an
electromagnetic eld during operation. This
eld may under some circumstances interfere
with active or passive medical implants. To
reduce the risk of serious or fatal injury, we
To Next Page
Loading...