Matrix L33-ER - FILTER MAINTENANCE; Filter Removal and Cleaning Process

19
FILTER MAINTENANCE
CLEANING AND DISINFECTIONS
Fig 1
Fig 2
Fig 3
Access to the internal parts,such as ! lters and
lamps is very easy.
You must open the side in plexyglass clicked
closed using the appropriate accessory given
with the machine, from the side vhere there are
not any hinges.
To remove the trasparent ! lter you must turn
the spring support and slip out the glass,see
the picture. Cleaning the re" ector be carefull
not to touch the lamps with the hands.
NB: During the maintenance and cleaning pay
attenction not to move the ! lters from the place
,because even a minimum movement could cau-
se the interruption of the control circuit.
Now it is suf! cient to un screw the screw (without
taking them out completely ) which ! xes the side
with the blue ! lters to be able to access to the
transparent glass and then the lamps.
At this point you are able to do the cleaning
operations, the maintenance and the substicyion
of the lamps.
1
3
4
2
6
7
5
Blue ! lter door
Transparent ! lter
Fixing screw
Control circuit
Support springs
lamp
Plexiglas
1
3
4
2
6
7
5
ONLY FOR INFORMATION
www.isoitalia.us