Matrix L33-ER - INSTRUCTIONS FOR ASSEMBLING THE APPARATUS; General Guidelines and Component Identification

22
INSTRUCTIONS FOR ASSEMBLING THE APPARATUS
(Section intended solely for technicians trained and authorised by I.SO Italia S.p.A.)
General guidelines
To assemble the tanning machine, keep in mind its main components (see ! g. 1).
The structure is divided mainly into:
1. Solar panel support ring and foot end base
2. Solar panel support ring and head end base
3. Solar panels
The solar panels are marked A - B - C, each one contains 6 lamps which are located in the upper part of the
tanning machine, and D - E - F each one contains 5 lamps which are located in the lower part of the sola-
rium.
In the solar panels A - B - C the ! rst two lamps located in the head panel constitute the facial part and can
work separately from the rest of the machine.
Fig. 1
Fig. 2
Solar panel support ring and foot end base
Solar panel support ring and head end base
Panel A
Panel B
Panel C
Control panel
Radio control box
Panel D
Panel E
Panel F
Plexiglas support surface
for laying on
Plexiglas for adjusted ventilation
FRONT VIEW
VIEW FROM HEAD END
Housing for lamp ventilation turbine
Housing for adjusted
ventilation turbine
Loudspeaker container
Air estractor
Housing for air ! lter
ONLY FOR INFORMATION
www.isoitalia.us