To Next PageTo Next Page
Need help?Do you have a question about the Matrix L33-ER and is the answer not in the manual?
Details the configuration of face lamps and tubes for the tanning machine.
Provides a visual layout of the tanning machine's lamps and overall design.
Lists harmonized reference standards and safety classification for the apparatus.
Specifies the physical dimensions and weight of the tanning machine.
Details power supply, electrical protection, generated air, and loudness specifications.
Declares compliance with relevant EU directives and safety standards.
Contains details of the authorization to mark, including applicant and standards.
Covers essential installation requirements and environmental conditions for safe operation.
Outlines critical operational warnings, restrictions, and user safety precautions.
Provides guidelines for pre-session preparation and safe exposure practices.
Lists contraindications, phototoxic substances, and skin preparation steps.
Explains the tanning process and how exposure times are determined based on skin type.
Provides detailed exposure schedules and usage guidelines based on skin type.
Explains the control panel layout, buttons, and their functions.
Shows diagrams of internal components like the console board.
Details initial setup procedures and how to reset factory-programmed values.
Guides on how to modify and set customized exposure times.
Explains how to view operating hours, starts, and maintenance information.
Describes how to track operating hours for lamps and maintenance intervals.
Explains how to select face and body tanning functions.
Provides detailed instructions for cleaning and disinfecting the tanning machine.
Outlines daily, pre-session, and periodic checks for proper functioning and safety.
Details the process for removing and cleaning filters, including important precautions.
Provides a visual overview of the main components of the tanning unit.
Illustrates the internal structure and components related to airflow and extraction.
Presents technical data, dimensions, and environmental requirements for the solarium.
Provides general guidelines and identifies key components for assembly.
Guides on positioning the solarium base and fitting the solar groups.
Details fitting the rest of the solar groups and making electrical connections.
Instructions for installing the upper handle and the radio console.
Covers positioning electrical panels, reactances, and cover components.
Guides on installing console, turbines, plexiglas, and initial filter/lamp maintenance.
Details procedures for adjusting mechanical components to ensure balanced movement.
Explains the function of the filter breakage control LED and how to perform a verification test.
Provides a guide to common problems, their causes, and recommended solutions.
Lists technical specifications for high-pressure tanning lamps.
Lists technical specifications for low-pressure tanning lamps.
Offers essential guidelines and information for safely replacing tanning lamps.
Provides guidelines for replacing plexiglass components and information on guarantees.
Details the step-by-step procedure for removing and positioning tanning lamps.
Covers definitions of waste materials and procedures for unit demolition and discharge.
Lists available spare parts and critical warnings regarding their use.
General