32
WARNING FOR LAMP REPLACEMENT
When replacing the bulbs in the I.SO Italia tanning machines, please follow the technical instructions
below in order to avoid an inconvenience during use.
1. Use only original spare parts; non-original spare parts may function differently to the I.SO Italia de-
sign and test speci! cations and the company will therefore not be held responsible for faulty opera-
tion in the case of use of non-original components.
2. Use components that are equal to the original ones; the use of lamps with different characteristics to
the ones installed by the manufacturer may cause malfunction.
3. I.SO Italia is authorised to supply products with alternative brands or types (due to the end of pro-
duction by the manufacturers) with identical characteristics to the original ones.
4. The use of the equipment must strictly follow the instructions provided in the use and maintenance
manual.
INFORMATION NOTE
It should be noted that the replacement of the lamps will inevitably lead to increased yield with respect to the
previous condition (i.e. worn lamps requiring replacement), as during the ! rst 50 hours the yield is greater
than the standard during the lifetime of the lamp. This indication must be considered when calculating the
session times during the ! rst hours following lamp replacement.
The lamp yield can also be in" uenced by the condition of the Plexiglas and the level of ! lter cleanliness; it is
therefore important to ensure that these components are always in good condition and perfectly clean in order
to obtain uniform tanning sessions over time.
It is again recommended to respect the exposure times indicated in the attached sheet according to the photo
type of the person using the tanning machine.
Due to the delicate nature and the need for precision, all these operations should be carried out by specialised
personnel.
The personnel in charge of managing the equipment bear prime responsibility for the operation of the equipment;
it is therefore recommended to verify the full and correct operation of the equipment prior to every session in
order to avoid the repetition of irregular operations.
WARNING FOR PLEXIGLAS REPLACEMENT
When replacing the Plexiglass in the I.SO Italia tanning machines, please follow the technical instruc-
tions below in order to avoid an inconvenience during use.
1. Use only original spare parts; non-original spare parts may function differently to the I.SO Italia de-
sign and test speci! cations and the company will therefore not be held responsible for faulty opera-
tion in the case of use of non-original components, the use of lamps with different characteristics to
the ones installed by the manufacturer may cause malfunction.
2. I.SO Italia is authorised to supply products with alternative brands or types (due to the end of pro-
duction by the manufacturers) with identical characteristics to the original ones.
3. The use of the equipment must strictly follow the instructions provided in the use and maintenance
manual.
4. The guarantee of the acrylics is recognized only for fabrication defects.
5. Any possible fabrication defects are to be contested within the ! rst two months from the date of in-
stallation.
6. Only use speci! c products for the cleaning of the acrylics, and in no case use products that contain
alcohol, even in a minimum quantity.
For guarantee acknowledgement and customer service
The maintenance booklet, in which, for example, all the technical work carried out is recorded, should be
kept in a safe place.
Also, please remember that a copy of the “Installation sheet” is to be returned to I.SO Italia.
For any requests that lie outside the contents of this handbook we advise you to contact your local dealer who
should also be contacted whenever you require technical assistance.
ONLY FOR INFORMATION
www.isoitalia.us
To Next Page
Loading...