24-Bit /192kHz High Performance Stereo Audio Processor
MATRIX
PLAY MESSAGE DISPLAY
When Mini-i is connected to a CD player, it will automatically detect the input signals for
Q-SUB CODE, and display the track information and time duration of the current play in
area 4 and 5 on the LCD Panel. When Mini-i fails to obtain the Q-SUB CODE, information will
be automatically hidden.
When connected to a computer by USB or through the sound card, it will not perform
this function, because digital signals processed by the computer software will no longer
output Q-SUB CODE information.
HEADPHONE OUTPUT
The standard 1/4”stereo headphone jack of high-quality on the front panel can drive
any headphone of 300 ohms and below, which makes it very convenient to use your
headphone by connecting to it.
COAXIAL OUTPUT
Mini-i possesses a digital coaxial output. The output state depends on the condition of
the output channel. This channel directly outputs current digital signals. It also supports the
original code output such as AC-3, DTS and so on. Mini-i cannot playback signals of the
non-PCM format. It is very easy to connect it with other digital audio equipments or AC-3,
DTS decoders.
● CONNECTIONS
AES/EBU input balanced analog output
● TROUBLESHOOTING
Check the following before calling for service:
z Whether all the connections have been done correctly or not
z Whether you operate Mini-i properly or not
If your problems cannot be solved by the remedies listed in the following table, it might
due to the malfunction of Mini-i’s internal circuitry. In that case, please immediately
unplug the power cable and contact the MATRIX distributor.
- 6 -
To Next Page
Loading...
Need help?
General
