14
Open Black & White Assembly Bag. Assemble the contact HR crossbar to the left and right handlebars using 14-socket head cap screw. Fasten the contact HR
crossbar/handlebar assembly to the console masts using 15-button head screw and 12-flat washer.
Pull the HR wires through handlebars using wire pull. Pull mast wire through handlebar.
Assembly tip: look at the labels on the HR wire coming from the contact HR crossbar to ensure contact with HR crossbar and left-right handlebars are
assembled in the proper orientation.
L
2
2
R
12
15
14
STEP 3
5.3 T1x, T1xe, T3x, T3xe MODEL ASSEMBLY STEPS
CHAPTER 6: T1x, T1xe, T3x, T3xe T
readmill specifications, parts, and assembly Guides
T1-T3_Treadmills_090422.indd 14 4/22/09 9:28 AM
To Next Page
Loading...
