To Next Page
L
Leslie RomeroAug 17, 2025
What to do if Matrix T130 XI Treadmill belt does not move but the console works?
- LLeah WilliamsonAug 18, 2025
If the belt on your Matrix Treadmill doesn't move or moves briefly while the console works, ensure you're following the recommended power guidelines: use a dedicated 15-amp circuit and avoid GFCI-equipped outlets, power strips, surge protectors, or extension cords. Make sure the treadmill is on a level surface. Verify the belt is properly tightened and centered. Check for any belt movement, noting how far or long it moves before stopping. Try moving the belt by hand; if it doesn't budge, the drive belt may be off or the motor bearings may have seized. Turn off and unplug the treadmill, remove the plastic motor cover, and check the drive belt for proper alignment.
General
