16
Replace the motor cover(s) and power the treadmill unit on. The power
button is located next to the power cord inlet.
Open Green Assembly Bag. Install the power cord and assemble item
18-power cord holder with item 22-button head screw. If your hardware pack
is missing item 22, check to see if the screws are already assembled on the
treadmill.
STEP 8
5.3 T5x, T7x, T7xe MODEL ASSEMBLY STEPS
CHAPTER 5: T5x, T7x, T7xe T
readmill specifications, parts, and assembly Guides
ASSEMBLY COMPLETE
Assembly is complete and the auto-calibration sequence must be run at this time.
T7-T5_Treadmills_r1.5.indd 16 2/8/10 1:22 PM
To Next Page
Loading...
Need help?
General
