RECOMMENDED CLEANING TIPS
A Use a soft, clean cotton cloth. DO NOT use paper towels to
clean surfaces on the treadmill. Paper towels are abrasive
and can damage surfaces.
B Use a mild soap and damp cloth. DO NOT use ammonia
based cleaner. This will cause discoloring of the aluminum
and plastics it comes into contact with.
C Do not pour water or cleaning solutions on any surface. This
could cause electrocution.
D Wipe the console and side rails after every use.
E Brush away any wax deposits from the deck and belt area.
This is a common occurrence until the wax is worked into the
belt material.
F Be sure to remove any obstructions from the path of the
elevation wheels including power cords.
G Monthly, unplug the treadmill and remove the motor cover.
Check for debris and clean with a dry cloth or small vacuum
nozzle.
H For cleaning 7xe displays, use distilled water in an atomizer
spray bottle. Spray distilled water onto soft, clean, dry cloth
and wipe display until clean and dry. For very dirty displays,
adding vinegar is recommended.
WARNING: Do not plug the treadmill in until the motor
cover has been reinstalled.
CAUTION: Be sure to have proper assistance to install and
move the unit in order to avoid injury or damage to the treadmill.
DECK AND BELT REPLACEMENT
One of the most common wear and tear items on a treadmill is
the deck and belt combination. If these two items are not properly
maintained they can cause damage to other components. This
product has been provided with the most advanced maintenance
free lubricating system on the market. The Matrix Ultimate Deck™
does not require any maintenance, other than cleaning and belt
tightening, for up to 25,000 miles.
WARNING: Do not run the treadmill while cleaning the belt and
deck. This can cause serious injury and can damage the machine.
Maintain the belt and deck by wiping the sides of the belt and
deck with a clean cloth. The user can also wipe under the belt 2
inches on both sides removing any dust or debris.
The deck can be flipped and reinstalled or replaced by an
authorized service technician. Please contact Matrix Fitness
Systems for more information.
To remove power from the treadmill, the power cord must
be disconnected from the wall outlet.
WARNING
18
To Next Page
Loading...
