Matrix T7XI-01 User Manual

26
1) To enter Engineering Mode, press "ENTER, 2, 0, 0, 1, ENTER" on the number keypad and Engineering Mode will appear on the display.
2) Engineering Mode is divided into 12 tabs, located on the left side of the screen. They are General, Workout, Setup Defaults, Network, Asset
Management, Weather, TV, Applications, Calibration, Hardware, Service, Errors.
3) Choose a tab by touching the screen over the desired tab.
4) Each of the tabs has options that will appear once you have chosen that particular tab.
5) Press the "HOME" button or the EMERGENCY STOP to exit Engineering Mode..
6.1 USING ENGINEERING MODE
CHAPTER 6: ENGINEERING MODE

Matrix T7XI-01 Specifications

General

Brand	Matrix
Model	T7XI-01
Category	Treadmill
Language	English