9
TREADMILL ASSEMBLY
There are several areas during the assembly process that special attention must be
paid. It is very important to follow the assembly instructions correctly and to make sure
all parts are firmly tightened. If the assembly instructions are not followed correctly, the
treadmill could have parts that are not tightened and will seem loose and may cause
irritating noises. To prevent damage to the treadmill, the assembly instructions must
be reviewed and corrective actions should be taken.
Before proceeding, find the treadmill frame serial number located on a barcode
sticker near the on/off power switch and power cord and enter it in the space
provided below. The console serial number is located on a barcode sticker on the
back of the console near the bottom center.
ENTER YOUR SERIAL NUMBERS AND MODEL NAME IN THE BOXES BELOW:
» Use the information above for initial setup and when calling for service.
WARNING
FRAME SERIAL NUMBER LOCATION
FRAME SERIAL NUMBER:
CONSOLE SERIAL NUMBER:
MODEL NAME:
MATRIX
CONSOLE SERIAL NUMBER LOCATION
To Next Page
Loading...
Need help?
General
