Matrix VS-S22 - Part 3 Lower Right Arm Assembly

12
PART 3: LOWER RIGHT ARM ASSEMBLY
STEP 1 | RIGHT ARM TO FRAME ASSEMBLY INSTRUCTIONS & NOTES
ID DESCRIPTION QUANTITY
15 Lower Right Arm Assembly 1
16 Wave (Spring) Washer 1
17 Right CAM Assembly 1
18
Axle (Ø20 X 250L)
1
19
Spacer (Ø45 mm OD/Ø30 mm ID)
2
20 Right Side Swingarm Assembly 1
ASSEMBLY
Assemble components in the order shown and slide assembly into place.
NOTE: Threaded end of axle must be up
17
15
19
18
16
20
CAM must be assembled
so the stop tab is behind
the swingarm bumper