Matrox D Series - Matrox D1450 Specifications; Matrox D1480 Specifications

Matrox D-Series – User Guide 23
* For more information, contact your Matrox representative.
† Certain limitations may apply. Matrox strongly recommends that you review the HDCP web site (www.digital-cp.com
) and
make sure you understand your legal obligations and responsibility.
‡ Length and height dimensions are with fansink, bracket, and framelock connectors.
Matrox D1450 Matrox D1480
Operating systems
supported
Windows Server 2019, Windows 10, and Windows Server 2016
Graphics processing unit
(GPU)
NVIDIA
®
NVIDIA
®
Memory 4 GB GDDR 5 4 GB GDDR 5
Card type PCIe 3.0 ×16 PCIe 3.0 ×16
Form factor Full height Full height
Monitors supported 44
Connectors 4× HDMI 4× DisplayPort 1.4
Maximum resolution
4096 × 2160 @60 Hz
4096 × 2160 @30 Hz
3840 × 2160 @60 Hz
3840 × 2160 @30 Hz
5120 × 3200 @60 Hz
*
5120 × 3200 @30 Hz
*
4096 × 2160 @60 Hz
4096 × 2160 @30 Hz
3840 × 2160 @60 Hz
3840 × 2160 @30 Hz
Audio output
4 multi-stream audio through
HDMI
4 multi-stream audio through
DisplayPort
HDCP compliant
†

Framelock 
Power consumption 50 W 50 W
Maximum card dimensions
‡
L: 20.137 cm (7.928 inches) / W: 1.872 cm (0.737 inches) /
H: 12.697 cm (4.999 inches)
Regulatory compliance
Class B: CE, FCC, ICES-3, KC, RCM
CSA
Electrical safety
considerations
The card d.c. input is to be separately approved with Reinforced
Insulation to MAINS, and power to the card is to be limited to 250 VA.
The card must only be installed and operated in a system meeting the
fire enclosure requirements of the IEC/CAN/CSA-C22.2/ANSI/UL
62368-1 and IEC/CAN/CSA-C22.2/ANSI/UL 60950-1
safety standards.
L'accès CC de la carte doit être approuvé séparément avec une
isolation renforcée au SECTEUR et la puissance fournie à la carte doit
être limitée à 250 VA.
La carte doit seulement être installée et utilisée dans un système qui
rencontre les exigences liées aux enveloppes ignifuges des normes de
sécurité IEC/CAN/CSA-C22.2/ANSI/UL 62368-1 et
IEC/CAN/CSAC22.2/ANSI/UL 60950-1.