24 Matrox D-Series – User Guide
Environmental
Notes and limitations
Your Matrox graphics card is 100% VGA compatible. It’s also compatible with the
following VESA® standards: VBE 3.0 (Super VGA modes), DPMS (energy saving), and
DDC-2B (Plug-and-Play monitor), and DDC-CI.
EDID (Extended Display Identification Data) 1.2 and 1.3 support.
The display resolutions and refresh rates available depend on your Matrox graphics card,
display driver, software monitor settings, and monitor. For information on the
capabilities of your monitor, see your monitor documentation.
When installing multiple cards in a system, a mix of D2480, D2450, D1450 and D1480
cards is not supported.
* For more information, contact your Matrox representative.
† Certain limitations may apply. Matrox strongly recommends that you review the HDCP web site (www.digital-cp.com
) and
make sure you understand your legal obligations and responsibility.
‡ Length and height dimensions are with fansink, bracket, and framelock connectors.
Temperature, operational
5 to 55 ºC (41 to 131 ºF)
(near board ambient)
Temperature, non-operational
storage and transportation
-40 to 70ºC (-40 to 158 ºF)
Humidity, operational (indoor) 20 to 80% (non-condensing)
Humidity, non-operational storage
and transportation
10 to 95% (non-condensing)
Atmospheric pressure, operational
650hPa (3,580 meters / 11,745 feet)
to 1013hPa (0 meters / 0 feet)
Atmospheric pressure,
non-operational and transportation
192hPa (12,000 meters / 39,370 feet)
to 1020hPa (-50 meters / -164 feet)
To Next Page
Loading...
