Matrox Extio Series - Page 27

Matrox Extio Series – User Guide 27
Windows 2000/XP –
1 Double-click the speaker icon ( or ) on the Windows taskbar.
If you
don’t see the speaker icon:
Windows 2000 –
a Click Start " Settings " Control Panel .
b Double-click the Multimedia or Sounds and Multimedia icon.
c Enable the “ Show volume control on the taskbar ” check box.
d Click OK .
e Double-click the speaker icon on the taskbar.
Windows XP –
a Click Start " Settings * " Control Panel " Sound, Speech, and Audio Devices * "
Sounds and Audio Devices . (* Depending on your configuration of Windows, this
part of the step may not be necessary.)
b Enable the “ Place volume icon in the taskbar ” check box.
c Click OK .
d Double-click the speaker icon on the taskbar.
2 Click Options " Properties .
3 Click the Recording button, enable all check boxes in the list box, then click OK .
4 For the Line In and/or Microphone controls, make sure the Volume slider
levels are okay (if you’re not sure, try half level), and the appropriate
Select
check box is enabled.
5 Click Options " Properties .
6 Click the Playback button, enable all check boxes in the list box, then click
OK .
7 For the Master , Line , and/or Wave controls, make sure the Volume sliders are at one-
quarter to one-half levels (if you’re not sure, try half level), and the
Mute check boxes are
cleared.
8 Close the dialog box.
Note: Depending on your sound driver, certain labels may be different. For example,
Line In may be labeled Line .