Need help?Do you have a question about the Matrox Extio 3 Series and is the answer not in the manual?
General| Number of Displays | 4 |
|---|---|
| Category | Extender |
| Maximum Resolution | 3840x2160 |
| Distance | Up to 10 km |
| Connectivity | Fiber Optic |
| USB | Yes |
| Audio | Yes |
| Power Supply | External Power Supply |
| Operating System Compatibility | Windows, Linux |
| Local Unit Connectors | DVI, DisplayPort, USB, audio |
| Remote Unit Connectors | DVI, DisplayPort, USB, audio |
| Latency | <1 frame |
Guidelines for safe installation and operation of Matrox products.
Instructions and warnings regarding product repair and servicing.
Steps to set up and operate Extio 3 devices in Point-to-Point mode.
Overview of operating Extio 3 devices over an IP network.
Detailed instructions for installing the Extio 3 transmitter card.
Steps to enable link redundancy in Matrox software.
Guidelines and prerequisites for updating Extio 3 firmware.
Procedure for updating firmware in Networked-LAN mode.
Procedure for updating firmware in Point-to-Point mode.
Prerequisites for setting up IPSec VPN networked mode.
Explains when to perform reboots or resets for Extio 3 devices.
Procedures for rebooting devices via software.
Procedures for hardware reboots and configuration resets.
General steps to take when experiencing product issues.
Lists common issues and their resolutions for the Extio 3.
To Next Page
