Matrox Extio 3 Series - Accessing Your Windows Firewall Settings

Matrox Extio 3 Series – User Guide 99
Accessing your Windows Firewall settings
To access your Windows Firewall settings:
Windows 11/10/7 –
1 Windows 11 – Click Start  Settings  Network & Internet  Ethernet  Configure
Firewall and security settings.
Windows 10 – Click Start  Settings  Network & Internet  Ethernet  Windows
Firewall
.
Windows 7 – Click Control Panel  Network and Internet *  Network and Sharing
Center
. (* Depending on your configuration, these steps may be unnecessary.)
8884 TCP —  Transmitter unit: Control channel
8886 UDP  — Transmitter unit: Audio back channel
8886 TCP —  Receiver unit: Audio back channel
8809 - 8872 TCP  — Receiver unit: A/V streams control
8809 - 8872 TCP —  Transmitter unit: A/V streams control
9223 - 9254 UDP  — Receiver unit: Multicast A/V streams
9223 - 9254 UDP — 
Transmitter unit: Multicast A/V
streams
10322 - 10438 UDP  —
Transmitter unit: Streaming to Mura
IPX
11900 UDP  —
Transmitter unit: SSDP unicast
M-SEARCH requests for UPnP
discovery and presence monitoring for
out-of-subnet and WAN devices
11900 UDP — 
Receiver unit: SSDP unicast
M-SEARCH requests for UPnP
discovery and presence monitoring for
out-of-subnet and WAN devices
12346 - 12752;
13414 - 13719
UDP  — Receiver unit: Unicast A/V streams
12346 - 12752;
13414 - 13719
UDP —  Transmitter unit: Unicast A/V streams
* Minimum requirements.
Note: You may need administrator rights to modify your Windows Firewall settings. For
more information, see Windows documentation or contact your system administrator.
Network Port Type Inbound Outbound Functionality