Matrox Extio 3 Series - Installing Matrox Extio Central Manager Software

Matrox Extio 3 Series – User Guide 75
 Review the safety information provided. For more information, see “Matrox safety
information”, page 6.
Software available in networked mode
 Extio Central Manager
 On-Screen Display (OSD)
Installing Matrox Extio Central Manager software
Matrox Extio Central Manager software enables you to remotely manage, monitor,
and configure your
networked Extio 3 devices.
Supported operating systems
Matrox Extio Central Manager supports the following operating systems: Windows® Server® 2022 ,
Windows® Server® 2019 , Windows® 11 (64-bit) , Windows® 10 (64-bit) , and Windows® 7 (64-bit) .
Obtaining Matrox Extio Central Manager software
To obtain the latest Extio Central Manager software, contact your Matrox representative. Matrox
makes the latest Extio Central Manager software available on the Matrox web site
(www.matrox.com/extio3/software
).
Installing Matrox Extio Central Manager software
To install the software for your Extio 3 product, run the installation program for your software
package on any system on the network. Follow the on-screen instructions.
Accessing Extio Central Manager software
Windows 11/10/7 – To access the main interface of Extio Central Manager software:
 Windows 11 and Windows 10 – Click Start  All apps *  Matrox Extio Central
Manager
*  Matrox Extio Central Manager . (* Depending on your configuration of
Windows, this part may not be necessary.)
 Windows 7 – Click Start  All Programs (or Programs )  Matrox Extio Central
Manager
*  Matrox Extio Central Manager . (* Depending on your version and
configuration of Windows, this part may not be necessary.)
Note: Only one (1) instance of Extio Central Manager software needs to be installed.