6 Matrox Extio Series – User Guide
Your Matrox card is now installed.
Before restarting your computer
, first connect your Extio unit to
your computer, then connect your monitors and your peripherals to your unit (see “Connection
setup”, page 7).
After connecting
, restart your computer and install your Matrox software (see
“Software setup”, page 11).
WA R N I N G :
If your computer doesn’t restart after your Matrox card is installed, turn off
your computer to avoid damaging electronic parts. For troubleshooting information, see
page 13.
To Next Page
Loading...
